How do I convert nitrogen to product for nitrogen recommendations?
- In the Nitrogen Management service, create a variable-rate recommendation.
- Export the recommendation to add a Nitrogen Recommendation layer under the crop-zone level in Field360 Studio.
- In Field360 Studio (as shown in the image), load the Nitrogen Recommendation layer into VRF Export.
Note: The image shows product 100-0-0 in pounds per acre, but the rates are correct.
- Enter a multiplier from the table below for the product to convert.
- Export the recommendation.
Use a multiplier from the table to convert dry products from pounds of nitrogen to pounds of product or convert liquid products from pounds of nitrogen to gallons of product.
Product |
Nitrogen analysis (%) |
Weight (lb/gal) |
Multiplier |
NH3 (82-0-0) |
82% |
- |
1.22 |
AN (34-0-0) |
34% |
- |
2.94 |
UREA (46-0-0) |
46% |
- |
2.17 |
ATS (12-0-0-26) |
12% |
11.1 |
0.75 |
UAN (28-0-0) |
28% |
10.67 |
0.33 |
UAN (30-0-0) |
30% |
10.86 |
0.31 |
UAN (32-0-0) |
32% |
11.07 |
0.28 |
APP (10-34-0) |
10% |
11.63 |
0.86 |
The multiplier was calculated as follows:
- Dry product: Dividing 1 by Nitrogen analysis (%)
- Liquid product: Dividing 1 by Weight (lb/gal)